Little Known Facts About Mineral Processing Equipment.

Are you trying to find a easy efficient gold recovery procedure?

Let me tell you concerning mineral processing equipment that’s being used successfully all round the world, by large scale mining operations through to artisanal miners.

It’s an alternative to using cyanide.


Among the very efficient and simple technologies does NOT require the use of harmful chemicals.

Sure, with a cyanide solution for gold leaching is widespread.

BUT, as Wired magazine by the UK points out…

The waste product from cyanidation is a disgusting and toxic gloop that can seep into rivers or poison groundwater, killing wildlife and producing landscape sterile. Huge pits of ore could be subjected to cyanide leaching in mines, together with the runoff a significant environmental hazard which demands a substantial cost to stay safe.

Instead of that, why don’t you utilize gravity?

Gravity separation of fine gold has been the functioning principle in several low-cost mineral processing plants, all around the world.

That is in both small-scale and large scale mineral extraction operations.

For example, a little gold shaking table uses a low-capacity vibrating table for gold extraction.


Of course, it is not only for extracting gold. Mineral extraction using a concentrating table works for regaining other valuable metals and minerals also, including all significant minerals, heavy mineral sands, illmenite, rutile, gemstones, platinum, tin, wolfram, tantalite, zircon, topaz and diamonds.

The Wave Table is perfect for cleaning up sluice box concentrates and separating gold from black sands, also. The Wave Table is perfect for cleaning up centers from Knelson, Falcon, Knudsen, STLBs as well as other centrifugal concentrators. (For large throughputs and higher capacity mining/processing operations, especially for gold, we can aid you with the most cost effective Centrifugal Concentrators.)


Larger mines are utilizing Wave Tables to perform closing gold clean-ups and the’finishing’ of gold concentrates. This procedure eliminates the need to utilize cyanide or mercury.

Gold wave tables are a lot better for your environment, in addition to for workplace safety!


If you want to effectively recover fine gold from gold bearing ore, then you need a Centrifugal Concentrator. For example, a 1-3 TPH unit can take care of both alluvial and hard rock material.

In a large mineral processing plant, you might use a Centrifugal Concentrator (known in some countries as an STLB) to execute the key concentration. That’s, to recover all of the heavy and gold minerals from the ore feed.


But to actually get’clean gold’, you have to then conduct the drawbacks through the following process (a secondary concentrator), like running the cons above a Wave Table. As a result, an updated percentage is regained that is a lot smaller in mass, therefore it’s a lot easier to take care of.

When concentrates are washed upon a Wave Table, you create clean gold prepared to be smelted and turned into a gold bar available.

This without using cyanide or mercury.


Another cyanide-free option is chemical leaching.

Gold may be pulled from run of mine ore in addition to from concentrates by using the Chemical Leaching System, which is a cost effective non-cyanide gold leaching system which can assist you with.

CLS may be used for almost any metallic but is particularly used for the retrieval of silver, gold and platinum group metals.


This incredible gold split apparatus comes in 3 models covering all scales of performance. Despite the title, a gold wave table works to extract ANY thick nutrient, in which there’s a specific gravity (density) differential between the valuable heavy mineral component and its own gangue or host substance. Additionally, it cleans grit and gold in the stripped carbon used in CIP/CIL applications.


To quote Ian, a 30-year experienced in the mining and minerals sector,”I’ve had success with all the Wave Table recovering very nice heavy minerals such as gold, mineral sands, zircon, rutile, illmenite, tantalite, scheelite, stibnite etc.. As it’s so effective at recovering very fine particle sizes, it has proved excellent as a scavenger on tailings. The Wave Table will easily recover 5 micron gold from tailings. In mineral processing, it is frequently that which you shed to tailings that’s as critical as what you recover. I’ve found that the Wave Table is the greatest device to test tailings for missing heavy minerals, including gold. A very simple test on your tailings will only require a few minutes. You may observe any heavy nutrient dropped in the tailings within a short time span. This type of test will obviate the need for prolonged firing assay turn around times.”


The most significant model is that the M10 which does up to 8TPH (tonnes per hour) and the M8 model does around 1TPH. The smallest model, the M5, is acceptable for smaller cleanups of 20 kgs per hour and can be used as a laboratory unit.

– Gold wave tables are a lot better for your environment

– Better for workplace safety too

– Never use mercury or cyanide again

– Low water use

– Efficient and cost-effective.

When you’re looking for gold recovery plant available, check out


The Wave Table may be used in the smallest to the biggest gold mine. They may be used for full scale manufacturing functions, or simply as a cleanup or immersion apparatus in the golden room.

The Wave Table is now increasingly being used to recover gold from test samples of a few kgs in size and upward. This kind of bulk testing is fast and the quantitative results imply that you are not just relying on fire assays or AAS, particularly in observable free gold deposits, even when gold is ultra fine (5 to 20 microns).

Visit to learn more today.

We can also assist you with a Chemical Leaching System, including supplies and training. Contact us for the “CLS Manual on Non-Cyanide Leaching”.

Also learn more about Gold Shaking Table here.